|
| Description: |
| Luminous and sonorous electronical tridimensional balancer. The shank gauges 6 mm of diameter. At the moment of contact, a red light up an acoustic signal starts. The shank ha a safety shifting of 4mm about. |
|
Characteristics: The balancing is an electrical instrument wed to clear distance or points. The shank measures is 6 mm ± 0,005 of diameter. At the moment of contact a red lights up and acoustic signal (bip bip) starts. Precision at the contact 0,005 mm. The shank has a safety shifting about 4 mm. |
|
||||
|
|
|||||
|
How to clear a point: Assemble the balancing on chuck and move from start point "A" to contact point "B". At the physical contact of the instrument with the piece, a led lights up (red light) and acoustics starts. The light and the signal indicate that the position of "B" point is distant from the testator centre 3 mm ± 0,005. |
|||||
|
|
|||||
|
How to
center internal an external circles: Position the balancing about in the center of circle, drive it to contact a "C" circle point. Read the position, then move the instrument to the opposite direction. Now read the distance from "C" point to "D" point, whwer led (red light) lights up and acoustic signal starts again. Half distance, gauged "L", is axis X centre. Repeating the same operation on the other axis Y, you obtain "O", centre of the circle. |
|
Copyright © 2006 [Meccanica Arnes]. All rights reserved. |
|
